21
98-05304-EN R2
Aeros 9040 field computer
HOME
GUID
ANCE
FULL SCREEN
IMPLEMENT
INTR
ODUC
TION
GNSS
RA
TE C
ONTR
OL
APPENDIX
SE
TUP
Video
Video setup is used to set up a single directly connected camera
or individual cameras while using an eight (8) channel or four (4)
channel Video selector module (VSM). Up to 8 cameras can be
configured if a VSM is installed.
1. Press CONFIGURATION side tab
.
2. Press
Video
.
3. Select the appropriate check box(es):
►Reverse –
►Upside down –
For normal video view
un-check all check boxes.
4. Press RETURN arrow or CONFIGURATION side tab
to
return to the main Configuration screen.
Figure 4-17: Video with 4 channel VSM options
Video setup unavailable
If a camera or VSM is not connected, setup options will not be
available.
Sensors
When a Pressure sensor interface kit (specifically, an Input output
module (IOM)) is on the system, options to set up and configure the
sensor will be available.
1. Press CONFIGURATION side tab
.
2. Press
Sensors
.
Figure 4-18: Sensors
The Pressure sensor interface kit is recognized on the console about
screen as an Input/output module (IOM).
Figure 4-19: Input/output module
Sensors unavailable
If a Pressure sensor interface kit is not installed, setup options will
not be available.
Summary of Contents for AEROS 9040
Page 1: ...Software version 4 31 U S E R M A N U A L AEROS 9040...
Page 116: ......
