97
98-05304-EN R2
Aeros 9040 field computer
HOME
SE
TUP
FULL SCREEN
IMPLEMENT
INTR
ODUC
TION
GNSS
RA
TE C
ONTR
OL
APPENDIX
GUID
ANCE
APPLICATION CONTROL OPTIONS
On vehicle view guidance screen, Application control options
displays ISOBUS Sprayer application options.
NOTE: Options are available only when a ISOBUS Sprayer rate
controller is on the system.
Target rate percentage increase/decrease icons increase/decrease
the application target rate per the established percentage set in
the Machine operation setup screen under Application rate step.
Automatic regulation mode will automatically adjust the application
rate based on the current speed in reference to the target rate.
NOTE: The Target rate percentage increase/decrease icons do the
same adjustment as the Boost/step percentage increase/
decrease keys from the ISOBUS UT.
To access the ISOBUS Sprayer application options:
1. Press APPLICATION CONTROL OPTIONS tab
to display
application control options.
2. Select from:
►Target rate percentage increase – establishes the
required boost percentage step increase
►Target rate percentage decrease – establishes the
required boost percentage step decrease
►Percentage boost and reset – shows current
boost percentage step and when pressed, zeros the boost
percentage step
Figure 7-43: Application control options
12
deg
-13
Mark A
3.5
(bar)
12
deg
-13
Mark A
3.5
(bar)
ZOOM IN/OUT
Vehicle view
Zoom in/out & perspective is used to adjust the vehicle’s view or
perspective to the horizon from vehicle view to bird’s-eye view.
• Zoom in will adjust view to vehicle view displaying a
compass on the horizon
• Zoom out will adjust view to bird’s-eye view
Figure 7-44: Zoom in to zoom out
27.00
ha
7.2
km/h
0.0
27.00
ha
7.2
km/h
0.0
Field view
Zoom in/out is used to adjust the map’s visible area.
• Zoom in will decrease the amount of map area visible.
• Zoom out will increase the amount of map area visible.
Summary of Contents for AEROS 9040
Page 1: ...Software version 4 31 U S E R M A N U A L AEROS 9040...
Page 116: ......
