-Shenzhen Guanhong Automation Co.,Ltd.-
SZGH-CNC1000MDb Series
- 171 -
304,B_Direction [1:normal, 0: Reverse]
It is for set the direction of B-axis. 1: Direction of B-axis is same to direction of code; 0:
Direction of B-axis is opposite to direction of code.
305,Numerator of B_Electronic Gear
It is Numerator of B-axis’s electron gear ratio. (B_CMR) Range: 1-999999.
306,Denominator of A_Electronic Gear
It is Denominator of A-axis’s electron gear ratio.(B_CMD) Range: 1-999999.
307,B_Reverse Backlash Compensation (um)
It is the value of reverse backlash compensation of B-axis.When direction of B-axis movement
is changed ,system will make compensation with the value automatically. Unit: um
308,G00 Speed of B Axis
It is rapid speed(also speed of G00) of B axis,Max is 240000(unit:mm/min)
Attention: the value depends on machine configuration,set wrong is very easy to trouble machine tool &
accident.
309,Max Speed of B_G1G2G3
It is for the Max running speed of B-axis when G1/G2/G3 interpolation.
310,B_Acceleration/Deceleration Constant
It is time constant of B-axis acceleration/deceleration,the bigger it is ,the faster the
ace/dec-eleration is.
Attention:This value depends on the machine structure,the heavier the load is ,the smaller the value
is.With stepper system,the value should less than 15000.
311,B_Max Speed with Handwheel (mm/min)
It is for limit max speed of B-axis when use handwheel in manual.
Attention:it is valid when >100,otherwise invalid.And suggest don’t over 4000.
312,B_Homing Speed (mm/min)
It is homing speed of B-axis .Unit:mm/min. the range is less than B_G00 speed.
313,B_Speed for Detect Z0 signal (mm/min)
It is speed for check Z0 pulse signal after B-axis reach at homing switch.
314,Range of detect Z0 in B axis
It is range that system can detect Z0 signal of encoder in B direction.
Attention:the value must be less than the length of one rev,otherwise homing failure.
315,Offset after homing in B axis
It is offset that B-axis after homing. Move with G00 speed. Unit: 0.01mm
316,Max Travel in B-Negative Direction
It is max travel in negative direction of B axis when soft-limitation, which is based on machine
coordinate system.
317,Max Travel in B-Positive Direction
It is max travel in positive direction of B axis when soft-limitation, which is based on machine
coordinate system.
