-Shenzhen Guanhong Automation Co.,Ltd.-
SZGH-CNC1000MDb Series
- 156 -
210
Wait SP_Speed smooth when threading
1
211
SP_Starting Speed_Tapping-Feed(rpm)
1
212
SP_Starting Speed_Tapping-Extract(rpm)
1
213
Acceleration-Feed-Rigid Tapping(rpm/S)[>1]
1
214
Acceleration-Retreat-Rigid Tapping(rpm/S)[>1]
1
215
Reserve-Feed-Rigid Tapping(1/1000Rev)[>2]
1
216
Trailing-Feed-Rigid Tapping(1/1000Rev)[>2]
1
217
Reserve-Retreat-Rigid Tapping(1/1000rev)[>2]
1
218
Trailing-Retreat-Rigid Tapping(1/1000rev)[>2]
1
219
Time Constant of Smooth processing for rigid tapping[20002-20500]
1
230
G00 Speed of SP-axis (mm/min)
1000
231
Mode for SP-axis[+4:F,+8:G90/G91,+16:Pulse]
10
232
Orientation Direction of SP-axis[0:Pos,1:Neg,2:near]
2
233
Control Mode of SP_homing
2
234
Offset Degrees when SP_Orientation(0.1Deg)[Neg:Non-Orientation]
0
235
SP_Homing Speed(0.1 rpm)
800
Explanation about Speed Parameter:
1,G00 Speed of X-axis (mm/min) 2,G00 Speed of Y-axis (mm/min)
3,G00 Speed of Z-axis (mm/min) 4,G00 Speed of A-axis (mm/min)
It is rapid speed(also speed of G00) of X/Z axis,Max is 240000(unit:mm/min)
Attention: the value depends on machine configuration,set wrong is very easy to trouble machine tool &
accident.
5,Manual Max Feeding Speed(mm/min)
It is the max feeding speed in the condition of Manual , Unit:mm/min.
Attention: reference speed=G00 speed*0.5 ,in order to make sure safe.
5-1,X_Manual Max Feeding Speed(mm/min)[>=50] 5-2,Y_Manual Max Feeding Speed(mm/min)[>=50]
5-3,Z_Manual Max Feeding Speed(mm/min)[>=50] 5-4,A_Manual Max Feeding Speed(mm/min)[>=50]
5-5,B_Manual Max Feeding Speed(mm/min)[>=50]
6,Auto Max Feeding Speed(mm/min)
It is the max of feeding speed in Auto ,Max is 30000.Unit:mm/min. This speed could faster
than G00 speed in order to each axis can reach at max speed when linkage as it only limit
integrated speed.
7,Default Speed of G01/G02/G03 (mm/min)
It is the default speed of G01/G02/G03 when the speed of first interpolation code
(G01/G02/G03) isn’t specified in Auto-running. Max:5000 (unit:mm/min)
8,Running Speed at Simulation Mode (mm/min)
It is running speed at the mode of Simulation. (press “Simulate”,is dry run mode) Max:240000.
(unit:mm/min)
