-Shenzhen Guanhong Automation Co.,Ltd.-
SZGH-CNC1000MDb Series
- 173 -
7.4 Tool parameter
P
Tool Parameter
Ex-Value
1
Mode of Setup Radius C Compensation
0
2
Mode of Cancel Radius C Compensation
0
8
Management of Tool(0:M06,1:T code,+32768:Tool life management)
1
32
Filtering for Position signal or WAT Signal
1287
Explanation about Tool Parameter:
1,Mode of Setup Radius C Compensation (0:A type, 1:B type)
2,Mode of Cancel Radius C Compensation (0:A type,1:B type)
They are mode of setup/cancel radius C compensation, details at chapter 3.26.
8,Management of Tool(0:M06,1:T code,+32768:Tool life management)
It sets management way for tool code,0:use M06 with T code, 1: use T code for change tool
directly, +32768, activate function of tool lift management.
Press “Redeem” key again to enter tool lift management screen, press “Redeem” again,exit to
Redeem screen.It can set using times or using time,and also can set current using times & using
time, unit of time is second(s),. When times or using time is reached, do related tool offset on next
time automatically, revise increment values are set by parameters on tool life management, after
revised,current using times or current using times will be cleared to 0.
32,Filtering for Position signal or WAT Signal
It is set filtering time for position signal of electric turret or WAT signal on special turret.
Time
Position Signal
WAT signal
2ms
+256
+2048
4ms
+512
+4096
8ms
+1024
+8192
