-Shenzhen Guanhong Automation Co.,Ltd.-
SZGH-CNC1000MDb Series
- 147 -
Press “T” key to copy all the program in system to USB.
Note: 1. It must return to program directory of system, also exit U-disk by press “F6” key before
unplugging U-disk, otherwise the date which is copied just now will be lost.
2. The name of folder can’t have blank symbol when using U-disk
.
6.9.10.3 Management of Parameters & Software
User can use U-disk to deliver parameters files , system software , for upgrade and renew,
back-up files and parameters of CNC system
A) Backup inner files & PLC files of system to U-disk
Note: Prepare a special empty U-disk for manage parameter files & PLC files of system better as
Parameter files is lots of about several dozens, Or setup a folder in U-disk on your computer firstly, open the
folder of U-disk on system before backup parameter files & PLC files into the folder of U-disk.
Fig6.9.5 Steps of Backup PLC & Parameter to U-disk
B) Restore parameters & PLC files into system with U-disk(Upgrade)
Note: Please put parameters & PLC for upgrade to a folder, which is better to avoid restore wrong files in
U-disk into CNC system, and result to damage inner files & system.
Fig6.9.6 Steps of Restore PLC & Parameter to U-disk
Insert U-disk to system, Press
“Program” , And then press “F6” key
to enter directory of USB-disk
Selecting folder(SZGH-CNC990TDB-2)
and “Enter” to enter the folder, Press “F1”
key to Backup, input password & Enter
Press “Enter” key, wait for seconds, it
will backup successfully, Press “F6” key
to exit U-disk & return back to system
Insert U-disk to system, Press
“Program” , And then press “F6” key
to enter directory of USB-disk
Selecting folder(SZGH-CNC990TDB-2)
and “Enter” to enter the folder, Press “F2”
key to restore, input password & Enter
Press “Enter” key, wait for seconds, it
will hint restore successfully, Press “F6”
key to exit U-disk & reboot system
