-Shenzhen Guanhong Automation Co.,Ltd.-
SZGH-CNC1000MDb Series
- 14 -
2.2 Configuration of Program
A group of commands given to the CNC for operating the machine is called the program. User
needs to compile part programs according to instruction formats of CNC system.By specifying the
commands, the tool is moved along a straight line or an arc, or the spindle motor is turned on and
off.
In the program, specify the commands in the sequence of actual tool movements.
Fig2.1.12 Program Configuration
Fig2.1.13 Configuration of Program
Normally, a program number is specified after the end
–
of
–
block (;) code at the beginning of
the program, and a program end code (M02 or M30) is specified at the end of the program.
