-Shenzhen Guanhong Automation Co.,Ltd.-
SZGH-CNC1000MDb Series
- 125 -
5.4 Usage for automatic dividing center
1. The X axis is divided center: M884(Corresponding to ProgramUser4)
1) Choose the current coordinate system such as G54;
2) Manually moving the X to the negative terminal of workpiece; MDI running the M884
instruction;
3) Manually moving the Y to the positive terminal of workpiece; MDI running the M885
instruction, automatically divide the center of Y axis and set the middle point of workpiece as
current coordinate system of Y axis origin, that's automatically setting the current coordinate system,
such as the coordinate offset value of Y axis in G54.
2. The Y axis is divided center (Corresponding to ProgramUser5): M885
1) Choose the coordinate system such as G54;
2) Manually moving the Y to the negative terminal of workpiece; MDI running the M885
instruction;
3) Manually moving the Y to the positive terminal of workpiece; MDI running the M885
instruction, automatically divide the center of Y axis and set the center point of workpiece as the
current coordinate system of Y axis origin,that's automatically setting the current coordinate system,
such as the offset value of Y axis in G54.
