-Shenzhen Guanhong Automation Co.,Ltd.-
SZGH-CNC1000MDb Series
- 96 -
#30=#4003
#31=#4014
G90
IF[#30 EQ 90] GOTO 1
G53
#98=#5001+#98
#99=#5002+#99
N1 WHILE[#86 GT 0] DO 1
#35=#98+#87*COS[#80]
#36=#99+#87*SIN[#80]
G81X#35Y#36Z#100R#92F#85
#80=#80+#81
#86=#86-1
END 1
G#30 G#31 G80
M99
Example
: Bolt hole circle drilling cycle G152 , to drill 5 holes at intervals of 45 degrees after a start
angle of 0 degrees. On the circumference of a circle with radius 40. The absolute center of the circle
is (100, 50)
Program:
G90 G92 X0 Y0 Z4
G152 X100 Y50 R10 Z-20.0 F20 I40.0 A0 B45.0 H5
M30
3.31.2 Inner Circle Groove Roughing Cycle (G110/G111)
This cycle starts from arc center, arc interpolation with spiral mode, until milling round groove.
G110 is CCW Inner circle groove roughing cycle, G111 is CW Inner circle groove roughing cycle.
Format: G110/G111 X_ Y_ Z_ R_ I_ W_ Q_ K_ V_ E_ D_ F_
X_Y_: The starting point in XY plane
