Control elements of SwyxPhone L64
Buttons
72
Ringing off
The „Ringing off“ button mutes the acoustic call signaling
(ringing) or sets a short signal tone instead. Hold down the
key till the required option (ringing off, signal tone) is acti-
vated and the corresponding symbol appears in the dis-
play. To switch the call signal back on, hold down the key once again.
Esc key
Press the Esc key to leave “Conversations” and “Server/
Settings” menus, dialling or active call screen for the main
screen.
Furthermore pressing the Esc key wakes up the phone from screen saver
mode.
9.1.2
Configurable Function Keys
SwyxPhone L64 has sixteen freely configurable function keys with LEDs.
These keys can be assigned to particular functions, e.g. "Call Swap" or
"Redial", or used as Line buttons or Speed Dials.
*
If you dial with the receiver on hook, pressing the Esc key is the only
means to cancel the dialling and return to the main screen.
Line 1
Line 2
Speed Dial 1
Speed Dial 2
Speed Dial 3
Speed Dial 4
Speed Dial 5
Speed Dial 6
Speed Dial 7
Speed Dial 8
Speed Dial 9
Conference
Voicemail
Phonebook
Call Forwarding
Redial
configurable
Function keys
Line keys
Function keys
Speed dials
By default the two upper function keys are configured as Line keys. The
next nine are speed dial buttons. The following function keys are “Con-
ference”, “Voicemail”, “Phonebook”, “Call Transfer” und “Redial”.
For further information please refer to chapter 12.4,
LED status of the function keys
State
Line key
Speed dial
Standard function
LED glows
green
The line is active
Subscriber is
logged on and
available
This function is
activated
LED blinks
green
Incoming call
-
-
LED blinks
orange
Connection is on
hold
Subscriber is away -
LED glows
red
Line disabled for
wrap up time
Subscriber is
speaking
-
LED blinks
red
-
Signalled call
-