Swyx SwyxPhone L6 series User Documentation Download Page 52

Page: 52 / 206

SwyxPhone L62 advanced Telephony Functions

Callback request

“Callback Requests” List

In the "Callback Requests" list you will find all callbacks that have been

directed to you.

This is how you open the “Callback Requests” list

Select the menu item "Lists" with the arrow buttons, and press the
"OK" button.

Choose "Callback Requests" and press the "OK" button.



The “Callback Requests” list will open.

Choose the appropriate entry and press the "OK" button.
You can

• with “Callback” or
• “Ignore”.

If you delete the list, the corresponding entry in the caller’s list will
be marked as “Callback obsolete”.

Callback 01/01 <Date>

>Dupont, Marie <Time>

1>Clear list

0>Back

The “Missed Callbacks” List

In the "Missed Callbacks" list you will find all callbacks on busy, which

were prompted because the person called had finished his conversation,
but were not confirmed by you.

This is how you open the “Missed Callbacks” list

The following will appear:

Press the "OK" button.



The “My Callback Requests” list will open.

If you select the required entry in this list, you can start this callback
again or delete it.

The “Missed Callbacks” list will remain in the display until it contains no

entries.

Missed Callbacks

>Dupont, Marie <Time>

My Callback 01/01 <Date>

>Schmidt, Eva <Time>

1>Clear list

0>Back

Summary of Contents for SwyxPhone L6 series















































































































































































































Search results

Summary of Contents for SwyxPhone L6 series

Reviews:

Related manuals for SwyxPhone L6 series

Brands by name

Popular brands

Swyx SwyxPhone L6 series, User Documentation

Search results

Summary of Contents for SwyxPhone L6 series

Reviews:

Related manuals for SwyxPhone L6 series

Brands by name

Popular brands