Swyx SwyxPhone L6 series, User Documentation

Page: 33 / 206

Telephoning with SwyxPhone L62 How do I end a call?
31
This is how you pick up a telephone call if you are currently involved in a dif ‐
ferent telephone call
1.
Press the blinking Line button.

The active connection is put on hold. The subscriber hears music
on hold, and the incoming call is picked up
If you are already on a call, Call Signalling will not be shown in the dis-
play, only by a blinking Speed Dial. In other words, in order to pick up
the call in this case, you need to have configured a Speed Dial. Also, you
cannot see who the caller is.
6.6 How do I end a call?
You have been speaking to a caller and now you would like to end the
call.
This is how you end a telephone call
1.
Simply place the handset on the hook.
or
1.
Use the arrow buttons to select the menu item “Disconnect”.
or
1.
Activate the handsfree mode, i.e. if the speaker is activated and
handset is on the hook, the Speaker button.
or
1.
Activate the handsfree mode, i.e. if the speaker is activated and
handset is on the hook, the Speaker button.

The call is ended.
Please remember when picking up a call via the menu that you must first
confirm the option “Pick up Call” and only then lift the handset. If you lift
the handset first, the call signalling will be ignored and a free line will be
activated.
If several subscribers, whose calls are signalled to you, receive a call at the
same time, only one name will be shown in the display.
This is how you end one of several calls
You can only end the active connection.
1.
Use the arrow buttons to select "Disconnect".

The call is ended.
Then you can select one of the remaining inactive lines.
2.
Confirm the selection with “OK”.

You can now speak with the subscriber.
6.7 How do I telephone with a headset?
SwyxPhone L62 has a headset connection and a preconfigured "Head-
set” function key, so that you can use the headset to call. To use the
headset, connect it to the telephone (see Chapter 7.8, Using a
headset , page 53).
This is how you pick up a call with the headset
A headset is connected. You are being called.
1.
When you receive a call, press the preconfigured “Headset”
function key in order to pick up the call.

You can telephone using the headset.
If you end a call and you have a second call on hold, a single telephone
ring will be produced after five seconds have passed. Pick up the handset
once again in order to directly connect to the caller on hold.
If you have the option „Transfer on Hookon“ activated and you go on
hook, a second call that you have initiated will be connected to the first
call, which is on hold.(see also Chapter 6.11,
Transfer When Placing
Handset on Hook , page 33).
If you have created the connection yourself, putting the handset on hook
will result in the transfer of this call to the call on hold. If you have several
lines on hold, the active line will also switch to the state “On hold”.