Swyx SwyxPhone L6 series User Documentation Download Page 152

Page: 152 / 206

SwyxPhone L66 advanced Telephony Functions

Callback request

150

Select the menu item "Pick Up Callback" with the arrow buttons,
and press the "OK" button.



The subscriber is then immediately called.

If you do not confirm the new call within 20 seconds, the "Missed Call-
backs" display will appear. The entry in the list “My Callback Requests”
will change to “Was free. Retry?”.

Confirm the message “Missed Callbacks” with the "OK" button.



The list of missed callbacks is displayed.

Select the entry you want.

• If you would like to call back to the displayed subscriber

immediately, lift the receiver or press the Speaker button.

• If you would like to see the details for this callback attempt, press

the "OK" button.
Details for this callback attempt, such as date and time, will be
displayed.
You can dial this number again or you can delete it.

If a connection is made to the person originally called, the entry in the
"My Callback Requests" list will be deleted automatically.

This is how you reject Callback on busy

You have made a Callback on busy request.
The person called ends his call.



A signal tone will be produced. The following appears on the dis-
play:

Montag, 23 Mai 2018

䢲䢻䢼䢷䢶

Pick up Callback

Reject Callback

Back

Select the menu item “Reject Callback" with the arrow buttons and
press the "OK" button.



The entry in the “My Callback Requests” list will be deleted.

This is how you delete Callback on busy

You have made a Callback on busy request.

Select “Main menu" with the arrow buttons, and press the "OK"
button.

Choose "Lists" and press the "OK" button.



The following will appear:

Press the "OK" button.



The “My Callback Requests” list will open:

Montag, 23 Mai 2018

䢲䢻䢼䢷䢶

Pick up Callback

Reject Callback

Back

Feature dialogue

Lists

My Callback Requests

Callback Requests

Redial

Back

Summary of Contents for SwyxPhone L6 series















































































































































































































Search results

Summary of Contents for SwyxPhone L6 series

Reviews:

Brands by name

Popular brands

Swyx SwyxPhone L6 series, User Documentation

Search results

Summary of Contents for SwyxPhone L6 series

Reviews:

Brands by name

Popular brands