manualshive.com logo in svg

Swyx SwyxPhone L6 series, User Documentation

Share
Download
Swyx SwyxPhone L6 series User Documentation Download Page 132

Telephoning with SwyxPhone L66  

  How do I pick up a call?     

130

A call which has been forwarded from another subscriber to you is 
shown as follows in the display:

Accept

Reject

L1:<Caller>

=><Group name>

Incoming call

<Subscriber>

Incoming call

<Subscriber>

<Number>

Line1

==>Rossi, Mario

Accept

Reject

Forward call to

If the number of the caller is known, i.e. if a name in the Global or Per-
sonal Phonebook or on a Speed Dial has been assigned to this number, the 
name will appear in the display. If not, only the number will be displayed.

If “Anonymous” appears in the display, the caller’s number was not trans-
mitted, e.g. because the caller has suppressed his number.

This is how you accept a telephone call

1.

Simply lift the handset. 

The handset is activated. You can now speak with the caller.

or

1.

Press the Speaker button .

The speaker and hands-free microphone will be activated, so that 
other people present in the room can also follow the conversa-
tion.

or 

1.

Press the Headset button.

The headset is activated. You can now speak with the caller.

14.5

How do I pick up a call?

In the case of a signaled call, you will only be shown that another user or 
a group has received a call. Signaling is set up by the system administra-
tor. You can pick up a signaled call.
When a call is signaled to you, 

the option “Pick up call" will appear on the display.

the Speed Dial assigned to the called number, if configured, will 
blink,

your display will show who the call was originally for:

If the call is not picked up by the destination subscriber and if you have

 

activated call signaling in the Settings menu, you will hear an additional 
brief acoustic signal after ten seconds.

Feature dialogue

<Caller>

=> <destination sub-

scriber>

Pick up call

Ignore

Summary of Contents for SwyxPhone L6 series















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands