Set It Up & Log On
General Safety Advice
18
4
Set It Up & Log On
This chapter provides information concerning the requirements and set-
tings necessary for initial operation of SwyxPhone.
4.1
General Safety Advice
Do not open the casing of the phone or the mains
power supply.
Keep the phone and the mains power supply dry.
Always disconnect SwyxPhone from the power sup-
ply before connecting or disconnecting any cables.
Do not expose the devices to direct sunlight or other heat sources.
Protect the devices against excessive dust, aggressive fluids and
vapours.
Do no expose the devices to electromagnetic fields. The speech
quality could be affected.
The phone may only be operated in the temperature environment of
5
º
C to 40
º
C.
Only use the original accessories.
4.2
Intended use
SwyxPhone is intended exclusively for use in residential and business
premises.
The SwyxPhone L6x phones are only suitable for connection to an IP net-
work and should only be used within the SwyxWare concept under
SwyxServer administration.
4.3
Care Instructions
Use a slightly damp cloth, or even better, an anti-static cloth, to wipe off
the case of your SwyxPhone. Do not use any detergents or scouring
agents.
4.4
Eco-friendly disposal
SwyxPhone cannot go in normal domestic refuse at the
end of its lifetime. Leave it at a collection point for the
processing of electrical and electronic devices. As some
parts or raw materials are recycled from used products,
you will make an important contribution toward envi-
ronmental protection.
Dispose of packaging materials in accordance with local regulations.
4.5
Scope of supply
The following items are included in the package:
SwyxPhone L6x
telephone handset and spiral cable
Manufacturer's guide.
4.6
System requirements
The following requirements must be fulfilled to be able to make phone
calls with SwyxPhone L6x:
Power supply (Mains Power Supply or Power over Ethernet)
network with TCP/IP protocol
operable 10/100 Base-T-Ethernet connection
Installed and operable SwyxServer
SwyxWare user account and PIN must be set up on the SwyxServer
To minimize the time and effort spent on configuring SwyxPhone, we
recommend using a configured DHCP server.
Do not use a dry cloth because this may cause a static charge which
could destroy the electronics.
The SwyxWare DVD includes label templates for SwyxPhone L62, Swyx-
Phone L64 and SwyxPhone Key Module 64
