Swyx SwyxPhone L6 series User Documentation Download Page 147

Page: 147 / 206

SwyxPhone L66 advanced Telephony Functions

Remote Inquiry

145

option of configuring the standard remote inquiry in SwyxIt!, you can

also change the PIN there.

This is how you listen to your voice mails remotely

In order for a received call to be picked up by your Standard Voicemail
and in order for you to have the option of Remote Inquiry, you must con-
figure your call forwarding accordingly. This means that an incoming call
must reach your Standard Voicemail and may not be redirected.For fur-
ther information please refer to the SwyxIt! documentation.

Dial your SwyxWare phone number.



The call is picked up and you hear the welcome announcement
of your Voicemail.

Press the * key during the welcome announcement.
You will hear the welcome announcement of the Remote Inquiry
and will be asked to enter your PIN.

Enter your PIN and complete the entry with the # key.

If new Voice mails have been received, you will first be given the
total number of Voice mails.
Then all of the new Voice mails will be played, beginning with the
one most recently recorded. The sender information of each
Voicemail is given first.

• Date received
• Time
• Caller’s number (if available)
• Name of the caller, if this can be determined for internal calls by

the system (For further information please refer to the SwyxIt!
documentation.)

and finally

• the recorded Voicemail.

The number of Voicemails available for remote inquiry is limited to the
most recent one hundred voice mails.

You will not be prompted to enter your PIN if you are calling from your
own SwyxWare extension number.

You can use the * key to skip the current message (sender
information or recorded Voicemail).

The following options are available to you during the output of a Voice-
mail:

If you have no new Voice mails, you will find yourself in the main
menu. Here you can listen to all available Voicemails and configure
your Call Forwarding Unconditional (see

This is how you change the

settings for Forwarding Unconditional by Remote Inquiry

, page 147).

After each Voicemail has been played, you have the choice of the
following options:

Button

Effect

Connects to the caller (if possible)

Back to the beginning of the Voicemail

Forward to the end of the Voicemail

10 seconds backward

Stop/Start Output (Pause)

10 seconds forward

Switch to the previous Voicemail

Switch to the next Voicemail

Main menu

Switch to the next information
(Date, Time, CallerID, Voicemail content)

Help

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

Abc

123

Summary of Contents for SwyxPhone L6 series















































































































































































































Search results

Summary of Contents for SwyxPhone L6 series

Reviews:

Related manuals for SwyxPhone L6 series

Brands by name

Popular brands

Swyx SwyxPhone L6 series, User Documentation

Search results

Summary of Contents for SwyxPhone L6 series

Reviews:

Related manuals for SwyxPhone L6 series

Brands by name

Popular brands