Swyx SwyxPhone L6 series User Documentation Download Page 138

Page: 138 / 206

Telephoning with SwyxPhone L66

The Secondary Call

136

Select the forwarding destination with the arrow buttons:

• Your Voicemail (This option is only available if the Voicemail

functions are configured),

• the number that you have defined as the destination for Call

Forwarding Unconditional,

• a number in the phonebook,
• any number.

Press the "OK" button.



The call is then immediately transferred.

Incoming call

Dupont, Marie

Line1

Reject

Forward call to

Incoming call

Dupont, Marie

Voicemail

number in phonebook

Forward call to

phone number

Back

14.14 The Secondary Call

You can use the “Secondary Call” function to define whether you are

available for an additional subscriber. You can set this option in the main

menu or during a call.

This is how you switch the Secondary Call function on / off

Select “Main menu" with the arrow buttons, and press the "OK"
button.

Scroll with the arrow button “Down” to the end of the list.



You will see in the display the currently valid Secondary call set-
ting: “on” or “off”:

Select “Secondary Call” and press the "OK" button to activate or
deactivate Secondary Call.

14.15 How do I forward a call?

You can forward incoming calls



to another telephone number (internal or external) or



to your Standard Voicemail.

There are several different methods for forwarding incoming calls:



Call Forwarding Unconditional: The call is then immediately for-
warded (“Do not disturb”).

Feature dialogue

Main menu

Call Forwardings

Charging info

No Disturb = off

Configuration

Secnd. call = on

Summary of Contents for SwyxPhone L6 series















































































































































































































Search results

Summary of Contents for SwyxPhone L6 series

Reviews:

Related manuals for SwyxPhone L6 series

Brands by name

Popular brands

Swyx SwyxPhone L6 series, User Documentation

Search results

Summary of Contents for SwyxPhone L6 series

Reviews:

Related manuals for SwyxPhone L6 series

Brands by name

Popular brands