Strebel S-WG 100, Installation, Operating And Maintenance Manual, Page: 82 / 125

E09.012.246 Manual S-WG
83
Menu D: General
D 7 c o n f i g
Function for the setting of the water pressure.
Up to 4 bar a sensor is used, up to 6 bar a switch.
0 = off
1 = sensor
2 = switch
Menu D: General
D 8 g a s t y p e
Function to select the gas type
0 = standard
1 = G31*
2 = B/P G30*/G31*
* (cf. EN437)
Menu D: General
D 9 c o n f i g
Function for setting the 'soft start' option
0 = normal start-up
1 = reduced fan ramp-up speed (I)
2 = reduced fan ramp-up speed (II)
Menu D: General
D A c o n f i g
Function: Pump mode
0 = normal
1 = relay 1 , connector 19 and 20 (lock-out)
2 = relay 2 , connector 21 and 22 (burner burning)
3 = relay 3 , connector 23 and 24 (heat demand)
4 = relay CN10 , connector 9 and 18
The screen texts on these
pages are standard part of
the software and apply to CH
systems (boilers) and/or DHW
devices (water heaters).