Strebel S-WG 100, Installation, Operating And Maintenance Manual, Page: 72 / 125

E09.012.246 Manual S-WG
73
From previous page
Screen: Selecting message at certain date.
M a i n t e n M o d e
D a t e
Press [►] to set:
The date for the maintenance message.
Press [◄] to:
Return to maintenance mode selection.
Press [►] to browse through the values that can be set
at the bottom line.
The blinking value can be changed with [▲] & [▼]
Press [ENTER] to confirm the changes.
Confirmation screen:
A r e y o u s u r e
< C a n c e l ; > C o n f i r m
Press [
◄ ] to cancel the changes or [►] to confirm the
changes. Hereafter the water heater returns to the op-
erating screen.
Screen: Message after total amount of ignition cycles.
M a i n t e n M o d e
I g n i t i o n c y c l e s
Press [►] to set:
The total amount of ignition cycles for the Maintenance message.
Press [◄] to:
Return to maintenance mode selection.
The blinking value can be changed with [▲] & [▼]
Press [ENTER] to confirm the changes.
Confirmation screen:
A r e y o u s u r e
< C a n c e l ; > C o n f i r m
Press [
◄ ] to cancel the changes or [►] to confirm the
changes. Hereafter the water heater returns to the op-
erating screen.
Go to
next page