Strebel S-WG 100, Installation, Operating And Maintenance Manual, Page: 77 / 125

E09.012.246 Manual S-WG
78
Menu A: Heating
A 6 H E c O f f 3
4 ° C
Select the cascaded boilers supply temperature control.
This parameter is the offset of the selected CH
supply temperature of EACH boiler of the total cascade.
Menu A: Heating
A 7 H E c P r b 3
2 5 ° C
Select the cascaded boilers supply temperature control.
This parameter is the proportional range of the selected
CH supply temperature of EACH boiler of the total
cascade and of the external (cascade) sensor.
Menu A: Heating
A 8 H E c l n t 3
8 0 S e c
Select the cascaded boilers supply temperature control.
This parameter is the integration time of the selected
CH supply temperature of EACH boiler of the total
cascade and of the external (cascade) sensor.
Menu A: Heating
A 9 T i m e r C o n t
0
Function to activate "external time controller":
0 = Off
1 = On
Connect to 13-14. Contact closed = daytime setting,
Contact open = night-time setting.
Menu B: Hot water
B 1 D H i p m p / t w v
1
Hot water function of the boiler by:
0 = pump
1 = 3-way valve
Menu B: Hot water
B 2 D H i f l o w L O
2 5 ° C
Hot water function of the boiler. This parameter is the
CH supply temperature LOW level with an indirect
hot water demand.
Menu B: Hot water
B 3 D H i f l o w H I
8 5 ° C
Hot water function of the boiler. This parameter is the
CH supply temperature HIGH level with an indirect
hot water demand.
The screen texts on these pages are
standard part of the software and
apply to CH systems (boilers) and/or
DHW devices (water heaters).