Strebel S-WG 100, Installation, Operating And Maintenance Manual, Page: 67 / 125

E09.012.246 Manual S-WG
68
HOT WATER PROGRAM
> > > From previous page < < <
Setting DHW program times:
P r o g r a m D H W
M o n 1 0 6 : 0 0 - 2 3 : 0 0
Press [►] to browse through the values that can be set at the bottom line.
The blinking value can be changed.
Press [▲] & [▼] to change the selected (blinking) value.
Press [ENTER] for confirmation screen when all settings are done.
Confirmation screen:
A r e y o u s u r e
< C a n c e l ; > C o n f i r m
Press [
◄
] to cancel the changes made (unit will reset).
Press [
►
] to confirm the changes. The last alternation will be blink-
ing for a few seconds and return to base menu.
Press [MENU] to exit. The water heater will reset and go to the operating
screen.
Press [
◄
] for next SCREEN
Copy programmed day for DHW:
C o p y f r o m : D H W M o n
C o p y t o : D H W T u e
Press [►] to switch between "Copy from" and "Copy to". The blinking day is
selected and can be changed.
Press [
▲] & [▼
] to change the selected (blinking) value.
Press [ENTER] for confirmation screen when all settings are done.
Confirmation screen:
A r e y o u s u r e
< C a n c e l ; > C o n f i r m
Press [
◄
] to cancel the changes made (unit will reset).
Press [
►
] to confirm the changes. The two days will blink for a mo-
ment.
Press [MENU] to exit. The water heater will reset and go to the operating
screen.
Press [
◄
] for next SCREEN
> > > Continue on next page LEGIONELLA program < < <