Strebel S-WG 100, Installation, Operating And Maintenance Manual, Page: 4 / 125

E09.012.246 Manual S-WG
5
INTRODUCTION
This manual is written for:

the installer

system design engineer

the service engineer
abbreviations
NB NOTICE
symbols
Warning: important information related to the safety
of persons and/or the appliance
terminology
Flow
Return
Water heater hot water out
Water heater cold water in
1 SAFETY GUIDELINES
1.1 General
Read all these instructions before commencing installation.
Keep this user manual near the water heater for quick reference.
The appliance should be installed by a skilled installer according to all applicable standards and regulations.
Failure to comply with these regulations could deem the warranty invalid.
Without written approval of the manufacturer the internals of the water heater may not be changed. When these
changes are executed without approval, the water heater certification is invalid.
Commissioning, maintenance and repair must be done by a skilled installer/engineer, according to all applicable
standards and regulations.
What should one do when there is the smell of gas:

Do NOT use any electrical equipment

Do NOT press any switches

Close the gas supply

Ventilate the room (open the windows and/or outside plant room doors)

Warn the installer immediately
The manufacturer/supplier is not liable for any damage caused by inaccurately following of these
instructions. Only original parts may be used when carrying out any repair or service works.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the appliance.