Strebel S-WG 100, Installation, Operating And Maintenance Manual, Page: 65 / 125

E09.012.246 Manual S-WG
66
10.9 Set points
The following graphs describe how to program the hot water set points.
Heating set point normal/day time: (parameter P4 AA = 1/2)
D H W s e t p o i n t
6 0 ° C
This is the water temperature set point that is active during
the programmed DHW periods (parameter P4 AA = 1/2)
DHW set point reduction: (parameter P4 AA = 1/2)
D H W R e d u c e
1 0 ° C
The reduction of the normal/day time set point. This reduc-
tion is used outside the programmed CH periods.
DHW setpoint reduction: (parameter P4 AA = 2 and
P5 DJ&DK =1)
H e a t i n g s e t p o i n t
7 5 ° C
This parameter is the local setpoint of the water heater and
is regulated on sensor S1 (parameter P4 AA = 2, P5 DJ = 1
and P5 DK =1 ).