background image

Commissioning

 

 

 

94 

Aperion 2101, Aperion 2401, Aperion 3401   04.18    

 

 

 Fig. 52 

 

1.

Couple the shell (1) of the drawgear and align tractor and machine in a straight line. 

2.

Couple the ball socket (2) of the forced steering axle. 

During initial commissioning: 



Set the steering rod such that the left-hand edge of the lever (3) is positioned in one line 
with the right-hand edge of the orientation notch (5) if tractor and machine are in one line. 

3.

Couple the propeller shaft. 

4.

Connect the hydraulic system. 

5.

Connect the brake system. 

6.

Connect the control set with the power supply of the tractor. 

7.

Switch the tractor ignition on. 

 

The steering computer boots and carries out a power-up test, checking the SES system for 
proper functioning. 

 

Preconditions for proper execution of the power-up test: 

• 

Coupled forced steering axle, 

• 

connected hydraulic system and sufficient hydraulic pressure 
(minimum 15 bar), 

• 

power supply of control set, 

• 

switched-on ignition of tractor, 

• 

with tridem chassis: a lowered lift axle, 

• 

stop of tractor and machine; if the combination of tractor and 
machine moves, the power-up test will be stopped and 
restarted when the movement stops. 

 

Summary of Contents for Aperion 2101






































































































































































































Reviews: