Strautmann Aperion 2101, Translation Of The Original Operating Instructions

Page: 139 / 197

Service and maintenance of machine
Aperion 2101, Aperion 2401, Aperion 3401 04.18 139
8.3.5 Lubricate automatic slack adjuster
1. Remove the rubber cap.
2.

Lubricate the lubrication point (arrow) of
the automatic slack adjuster with long-life
grease (80 g) until a sufficient amount of
fresh grease comes out at the adjusting
screw.
3. Use a ring wrench to turn the adjusting
screw back by about one turn.
4. Manually actuate the brake lever several
times.
Automatic readjustment must be easy.
Actuate the brake lever again several
times if necessary.
5. Retighten the adjusting screw.
6. Reinstall the cap and lubricate with long-
life grease one more time.
Fig. 90
8.3.6 Tighten wheel nuts
Use a torque wrench to tighten the wheel nuts
crosswise at the tightening torque listed in the
table below.
Fig. 91