Service and maintenance of machine
144
Aperion 2101, Aperion 2401, Aperion 3401 04.18
Fig. 96
Fig. 97
8.4.1
Lubricate bearing of dash pots
Lubricate the lubrication points (1) at the top and
bottom of the dash pot on the empty machine
until fresh grease comes out of the bearings.
Ensure in addition that the
cylinder and the feed line are
always bled (shop work!).
Fig. 98
8.4.2
Drain condensate
Successively carry out the required work for the right-hand and left-hand machine side:
1.
Hitch the machine to the tractor.
2.
Park the tractor and the empty machine on even ground.
3.
Secure tractor and machine against accidental rolling.
4.
Connect the hydraulic hose pipe of the levelling valve with a single-acting control device of the
tractor.
5.
Completely lower the dash pots of the chassis:
Summary of Contents for Aperion 2101
