Strautmann Aperion 2101, Translation Of The Original Operating Instructions

Page: 128 / 197

Use of machine
128 Aperion 2101, Aperion 2401, Aperion 3401 04.18
6.

Switch the hydraulic drive for the transport floor off.
7.

Make sure that people leave the swivelling range of the tailgate.
8.

Close the tailgate.
E-control set
1.

Switch the control set on.
2.

Lock the steering axle before travelling over a clamp silo.
3.

Make sure that people leave the swivelling range of the tailgate.
4.

Open the tailgate completely.
5.

Set the speed for the transport floor feed via the proportional controller.
6.

Switch the hydraulic drive for the transport floor on.
7.

Start to move and select the travelling speed of the tractor according to the height of the desired
discharged material stack.
8.

Set the proportional controller to a faster level to increase the speed for the transport floor feed
for complete emptying.
9.

Switch the hydraulic drive for the transport floor off.
10.

Make sure that people leave the swivelling range of the tailgate.
11.

Close the tailgate.
12.

Switch the control set off.
7.3.2 Hydraulic transport floor drive / With beaters
WARNING Risk of being drawn in and becoming entangled during
discharge within reach of powered beaters!
Make sure that people leave the area of the beaters before
switching the beater drive on.
•
Open the tailgate completely only with the tractor's p.t.o. shaft
stopped.
•
Set the feed rate for the transport floor such that the beaters
are prevented from becoming clogged.
Direct control
1.

Lock the steering axle before travelling over a clamp silo.
2.

Make sure that people leave the swivelling range of the tailgate.
3.

Open the tailgate completely.
4.

Make sure that people leave the spreading range of the beaters.
5.

Switch the tractor's p.t.o. shaft on.
6.

Let the tractor's p.t.o. shaft smoothly start to run such that the beaters are able to loosen
themselves.