Strautmann Aperion 2101 Translation Of The Original Operating Instructions Download Page 36

Page: 36 / 197

Product description

Aperion 2101, Aperion 2401, Aperion 3401 04.18

2.11

Underride guard

During road travel, the underride guard must not be further away
from the ground than 550 mm. Adapt height to tyres.

2.11.1

Mechanically folding underride guard

Optional extra

Two people are required for folding the mechanical underride guard.

The mechanically folding underride guard is set
to the desired height and secured by means of
the locking bolt (1) with the help of two people.

Fig. 26

2.11.2

Hydraulically folding underride guard

Optional extra

The hydraulic underride guard is operated by
remote control from the tractor directly via a
double-acting control device of the tractor.

Fig. 27

Summary of Contents for Aperion 2101






































































































































































































Search results

Summary of Contents for Aperion 2101

Reviews:

Related manuals for Aperion 2101

Brands by name

Popular brands

Strautmann Aperion 2101, Translation Of The Original Operating Instructions

Search results

Summary of Contents for Aperion 2101

Reviews:

Related manuals for Aperion 2101

Brands by name

Popular brands