Strautmann Aperion 2101 Translation Of The Original Operating Instructions Download Page 111

Page: 111 / 197

Operation

Aperion 2101, Aperion 2401, Aperion 3401 04.18

111

Operation

Depending on the machine's equipment, the hydraulic functions of the machine are actuated:

•

via the control devices of the tractor,

•

via a control set (optional extra).

6.1

Operation with direct control and forced steering axle system

The control set:

•

is mounted on the tractor within view and
easy reach of the operator.

•

serves to operate the machine.

•

must be connected to the tractor's power
supply (12 V) via the 3-pole plug (DIN
9680).

Functions:

•

Switch work lights on and off.

•

Lock / Unlock forced steering axle system.

Fig. 74

Summary of Contents for Aperion 2101






































































































































































































Search results

Summary of Contents for Aperion 2101

Reviews:

Related manuals for Aperion 2101

Brands by name

Popular brands

Strautmann Aperion 2101, Translation Of The Original Operating Instructions

Search results

Summary of Contents for Aperion 2101

Reviews:

Related manuals for Aperion 2101

Brands by name

Popular brands