Strautmann Aperion 2101 Translation Of The Original Operating Instructions Download Page 23

Page: 23 / 197

Product description

Aperion 2101, Aperion 2401, Aperion 3401 04.18

2.6

Steering axle

2.6.1

Passive steering axle

The unlocked passive steering axle (1)

•

can move freely and follows the turning
radius of the corner during cornering.

•

protects the sward during cornering.

•

reduces tyre wear during cornering on
paved areas.

The passive steering axle (1) is unlocked and
locked from the tractor via remote control.

Fig. 12

Depending on the equipment, the passive steering axle is unlocked and locked:

•

directly via a single-acting control device of the tractor.

•

via the control set.

2.6.2

Steering axle for electro-hydraulic forced steering axle system SES

Optional extra

Fig. 13

(1)



Control set (exemplary diagram)

(2)



Steering computer

(3)



Angle sensor (on drawbar and axle)

(4)



Speed sensors

(5)



Hydraulic components

(6)



Pressure switch

Summary of Contents for Aperion 2101






































































































































































































Search results

Summary of Contents for Aperion 2101

Reviews:

Related manuals for Aperion 2101

Brands by name

Popular brands

Strautmann Aperion 2101, Translation Of The Original Operating Instructions

Search results

Summary of Contents for Aperion 2101

Reviews:

Related manuals for Aperion 2101

Brands by name

Popular brands