manualshive.com logo in svg

Strautmann Aperion 2101, Translation Of The Original Operating Instructions

Share
Download
Strautmann Aperion 2101 Translation Of The Original Operating Instructions Download Page 52

Safety instructions

 

 

 

52 

Aperion 2101, Aperion 2401, Aperion 3401   04.18    

 

3.3.3 

Safety and protective devices 

  

This chapter shows the location of the properly installed protective devices in protective position. 

Check all safety and protective devices for visible damage and functional ability at least once a day. 

Defective or removed safety and protective devices might cause dangerous situations. 

 

WARNING 

 

Risk of crushing, becoming entangled, wound up and being 
drawn in due to powered, unprotected driving elements! 

This risk may cause most serious injuries, in particular to hands and 
fingers. 

• 

Start the machine only with the protective devices completely 
mounted and in fully operable condition. 

• 

Immediately replace defective protective devices with new 
ones. 

 

 

 Fig. 37 

(1) 

Tailgate 

(2) 

Side guard, beater drive 

(3)

Underride guard (optional extra) 

(4)

Protective sleeves for drive along the drive 
shaft for beaters 

 

 

 

(5)

Bottom guard at drive shaft for beaters 

(6)

Propeller shaft guard 

 

 

 

 

 

 

Summary of Contents for Aperion 2101






































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands