Strautmann Aperion 2101 Translation Of The Original Operating Instructions Download Page 159

Page: 159 / 197

Service and maintenance of machine

Aperion 2101, Aperion 2401, Aperion 3401 04.18

159

8.9

Beaters

WARNING

Risk of slipping, stumbling or falling when carrying out service
and maintenance work on the roller chains for the beater drive!

It is imperative to use a mobile service platform with ladder when
carrying out service and maintenance work on the roller chains for
the beater drive.

8.9.1

Check/Retighten/Lubricate roller chain tension

Each roller chain (1) of the beaters is equipped
with an automatic chain tensioner (2).

Retighten the roller chains if they
can be depressed by more than
5 mm.

Fig. 116

Summary of Contents for Aperion 2101






































































































































































































Search results

Summary of Contents for Aperion 2101

Reviews:

Related manuals for Aperion 2101

Brands by name

Popular brands

Strautmann Aperion 2101, Translation Of The Original Operating Instructions

Search results

Summary of Contents for Aperion 2101

Reviews:

Related manuals for Aperion 2101

Brands by name

Popular brands