Safety instructions
Aperion 2101, Aperion 2401, Aperion 3401 04.18
59
•
The period of use of the hydraulic hose pipes should not exceed six years. For thermoplastic
hoses and hose pipes, other reference values may be relevant. The possible maximum shelf life
of two years must not be exceeded.
•
Never try to block hydraulic hose pipe leaks with your hands or fingers!
Liquid (hydraulic oil) squirting out under high pressure may enter the skin and the body and
cause serious injuries! If injuries caused by hydraulic oil occur, immediately contact the medical
services.
•
Use appropriate means when trying to locate leakages! Risk of serious infections.
•
Risk of explosion due to improper work on hydraulic accumulators!
Welding, soldering, drilling or other work on hydraulic accumulators which might affect the
mechanical properties is not allowed.
•
Risk due to leaking hydraulic oil!
This risk may cause serious injuries due to slipping. Immediately remove fresh oil stains by
means of binding agents.
Dispose of hydraulic oil according to regulations. Contact your oil supplier in case of disposal
problems. Beware that no hydraulic oil penetrates the soil or water.
3.4.3
Electrical system
•
Always disconnect the battery (minus pole)/control unit when carrying out work on the electrical
system!
•
Do not connect any additional electrical loads to the control set.
Additional electrical loads are e.g. a silage additive pump or additional lighting (more than
two lamps).
For additional loads, we offer an additional control which triggers these additional loads
via LIN module/control unit.
•
Only use the specified fuses. When using too big fuses, the electrical system may be destroyed
– risk of fire!
•
Ensure proper connection of the battery:
Connection: First connect the plus pole, then the minus pole.
Disconnection: First disconnect the minus pole, then the plus pole
•
Always cover the plus pole of the battery as required. Risk of explosion in case of accidental
ground!
•
Risk of explosion! Avoid sparking and open fire in the vicinity of the battery!
•
The machine can be equipped with electronic components and parts, the functioning of which
may be affected by electromagnetic emissions of other devices. Such interferences may be a
risk to people if the following safety instructions are not observed.
In case of a retrofitting of electrical devices and/or components into the machine and their
connection to the on-board electrical system, the user must check on his own
responsibility whether the retrofitted parts interfere with the vehicle electronics or other
components.
Ensure that the retrofitted electrical and electronic components comply with the EMC
directive 2014/30/EU as amended from time to time and bear the CE symbol.
3.4.4
Propeller shafts
•
Exclusively use the propeller shaft specified or delivered by B. Strautmann & Söhne GmbH u.
Co. KG and equipped with proper protective devices!
Summary of Contents for Aperion 2101
