Strautmann Aperion 2101 Translation Of The Original Operating Instructions Download Page 70

Page: 70 / 197

Safety instructions

Aperion 2101, Aperion 2401, Aperion 3401 04.18

87010285

Close the stop-cock (position 0) to secure the tailgate before carrying out work
beneath the lifted tailgate.

87010288

This pictograph marks fixing points for lifting equipment (jack).

87006091

This pictograph marks lashing points for fixing lashing equipment when
transporting the machine.

54100504

Only lift or lower the tailgate with the covering system (optional extra)
completely opened.

72206518

Set the stop-cock to the respective position for
retracting and extending the extensions.

72206526

Set the control lever to the respective position for hydraulic activation of the tailgate
or the potato gate.

Summary of Contents for Aperion 2101






































































































































































































Search results

Summary of Contents for Aperion 2101

Reviews:

Related manuals for Aperion 2101

Brands by name

Popular brands

Strautmann Aperion 2101, Translation Of The Original Operating Instructions

Search results

Summary of Contents for Aperion 2101

Reviews:

Related manuals for Aperion 2101

Brands by name

Popular brands