Strautmann Aperion 2101, Translation Of The Original Operating Instructions

Page: 116 / 197

Operation
116 Aperion 2101, Aperion 2401, Aperion 3401 04.18
6.2.2.7 Power/Reverse transport floor in discharging direction
Risk due to failure of components caused by frequent or long
reverse of transport floor!
Observe the fact that the feed direction of the transport floor is only
allowed to be reversed for a short time (max. 3 seconds).
Check the tension of the transport floor conveyor every day, in order
to prevent material damage.
Reverse:
•
only for a short time,
•
only in case of emergency,
•
to eliminate blockages at the beaters during discharge.
Symbol Switch position Transport floor
Top
Power in discharging
direction
Middle OFF
Bottom
(keep hold of)
Reverse
6.2.2.8 Adjust transport floor speed
Symbol Switch position Transport floor speed
1 Minimum
10 Maximum