Strautmann Aperion 2101 Translation Of The Original Operating Instructions Download Page 126

Page: 126 / 197

Use of machine

126

Aperion 2101, Aperion 2401, Aperion 3401 04.18

7.1

Transport journeys

•

Observe the chapter "Safety instructions", when carrying out
transport journeys.

•

Before carrying out transport journeys, check



the supply lines for proper connection,



the lighting system for damage, proper functioning and
cleanliness,



the brake and hydraulic system for visible defects,



whether the parking brake has been completely
released,



the brake system for proper functioning.

WARNING

Risk of dangerous travelling situations due to accidental
actuation of hydraulic functions during transport journeys!

Switch the

Road Travel Mode

on before carrying out transport

journeys.

The covering system (optional extra) must be closed during
transport journeys.

Observe the fact that the driving characteristics of the tractor are
influenced by the load, in particular if the machine is partly empty.

Avoid long journeys on motorways and highways. The machine is
not designed for long-distance journeys at higher speeds.

Summary of Contents for Aperion 2101






































































































































































































Search results

Summary of Contents for Aperion 2101

Reviews:

Related manuals for Aperion 2101

Brands by name

Popular brands

Strautmann Aperion 2101, Translation Of The Original Operating Instructions

Search results

Summary of Contents for Aperion 2101

Reviews:

Related manuals for Aperion 2101

Brands by name

Popular brands