Strautmann Aperion 2101, Translation Of The Original Operating Instructions

Page: 91 / 197

Commissioning
Aperion 2101, Aperion 2401, Aperion 3401 04.18 91
5.8.1.2 Load-sensing mode
1. Always swivel the respective operating element at the control device on the tractor to floating
position.
2. Turn the tractor engine off.
3. Screw the load-sensing control line into the connecting aperture of the electro-hydraulic control
block.
4. Screw the load-sensing screw (1) at the electro-hydraulic control block in as far as it will go.
5. Connect the load-sensing control line to the load-sensing control system of the tractor.
6. Connect the tank line (return line) to the free return port of the tractor provided for this purpose.
7. Connect the pressure line (return line) with the pressure line to the hydraulic pump of the tractor
provided for this purpose.
5.8.2 Couple drawgear
WARNING Risk of crushing, being drawn in, becoming entangled and risk
of impact to people if the machine accidentally loosens from
the tractor!
•
Check whether the coupling device on your tractor is licensed
for taking up the machine's drawgear.
•
Properly hitch the machine to the tractor.
•
Never use damaged or deformed trailer systems.
5.8.2.1 Tow-hook (hitch hook) and drawbar lug (hitch ring)
1. Secure the machine against rolling.
2. Make sure that people leave the hazardous area between tractor and machine before
approaching the machine.
3. Lower the tow-hook.
4. Approach the machine as closely as possible such that the lowered tow-hook can take up the
drawbar lug.
5. Lift the tow-hook to catch the drawbar lug.
After automatic engaging, the drawbar lug is fixed between the tow-hook and the lock (holding-
down device).
6. Secure the tractor against accidental starting and rolling.
7. Ensure that the tow-hook is properly locked.
8. Connect the supply lines.
9. Release the parking brake.
10. Lift the supporting leg to transport position.