Stratasys P750K, User Manual

Page: 64 / 196

Using Objet Studio
5–28
DOC08010 Rev. A (DRAFT 1)
To ensure that objects are always positioned directly on the tray:
1. From ȱ the ȱ Tools ȱ menu, ȱ select ȱ
Options
, ȱ and ȱ display ȱ the ȱ Settings ȱ tab.
Figure 5-34: Options dialog box, Settings tab
2. In ȱ the ȱ Automatic ȱ Lay ȱ On ȱ (Gravity) ȱ section, ȱ select ȱ
Always
. ȱ
Other Z-axis options (in the Automatic Lay On section):
•
When under the tray
—The ȱ display ȱ of ȱ objects ȱ that ȱ are ȱ below ȱ the ȱ build ȱ
tray ȱ is ȱ automatically ȱ changed ȱ so ȱ that ȱ the ȱ object ȱ is ȱ at ȱ tray ȱ level.
•
Never —The ȱ display ȱ of ȱ objects ȱ that ȱ are ȱ above ȱ or ȱ below ȱ the ȱ build ȱ tray ȱ is ȱ
not ȱ changed.
Valid Object
Placement
You ȱ can ȱ ensure ȱ that ȱ models ȱ do ȱ not ȱ overlap ȱ when ȱ you ȱ position ȱ them ȱ on ȱ the ȱ
build ȱ tray, ȱ and ȱ that ȱ they ȱ do ȱ not ȱ extend ȱ beyond ȱ the ȱ tray. ȱ
To ensure valid object placement:
1. From ȱ the ȱ Tools ȱ menu, ȱ select ȱ
Constraints Settings
.
Figure 5-35: Constraints Settings dialog box