Stratasys P750K, User Manual

Page: 170 / 196

Operating & Maintaining the Stratasys P750K 3D Printer
6–54
DOC08010 Rev. A (DRAFT 1)
3. In ȱ the ȱ following ȱ screen, ȱ select ȱ the ȱ UV ȱ sensor ȱ and ȱ measuring ȱ device ȱ to ȱ
be ȱ used.
Figure 6-83: UV device selection
4. Make ȱ sure ȱ that ȱ the ȱ build ȱ tray ȱ is ȱ clear ȱ (empty), ȱ confirm ȱ this ȱ in ȱ the ȱ
wizard ȱ screen ȱ and ȱ click ȱ
Next
.
Figure 6-84: Printer preparation
¾
When ȱ using ȱ the ȱ Stratasys ȱ UV ȱ sensor ȱ (TOL Ȭ 03005 Ȭ S), ȱ continue ȱ with ȱ
“UV ȱ sensor ȱ connected ȱ to ȱ printer,” ȱ below.
¾
When ȱ using ȱ a ȱ stand Ȭ alone ȱ radiation ȱ meter, ȱ continue ȱ with ȱ “External ȱ UV ȱ
meter” ȱ on ȱ page 57.
UV Measuring Device
When you use the Stratasys UV sensor (TOL-03005-S), you connect it to the
printer. The wizard automatically measures and calibrates the UV radiation.
If you use a stand-alone UV radiation meter, you need to manually enter the
readings from the meter in the wizard screens.