Stratasys P750K, User Manual

Page: 138 / 196

Operating & Maintaining the Stratasys P750K 3D Printer
6–22
DOC08010 Rev. A (DRAFT 1)
9. Clean ȱ the ȱ orifice ȱ plates, ȱ with ȱ a ȱ back Ȭ and Ȭ forth ȱ motion ȱ (see ȱ figure 6 Ȭ 20). ȱ
Use ȱ the ȱ mirror ȱ to ȱ make ȱ sure ȱ that ȱ you ȱ have ȱ removed ȱ all ȱ of ȱ the ȱ residue ȱ
material.
Figure 6-20: Cleaning the heads
10. Clean ȱ the ȱ entire ȱ roller ȱ surface, ȱ by ȱ rotating ȱ it ȱ as ȱ you ȱ clean.
11. When ȱ you ȱ have ȱ finished ȱ cleaning, ȱ select ȱ the ȱ confirmation ȱ check ȱ boxes ȱ
in ȱ the ȱ wizard ȱ screen ȱ (see ȱ figure 6 Ȭ 19) ȱ and ȱ click ȱ
Next
.
12. Remove ȱ the ȱ cleaning ȱ materials ȱ from ȱ the ȱ printer ȱ and ȱ close ȱ the ȱ cover. ȱ
13. Select ȱ the ȱ confirmation ȱ check ȱ boxes ȱ in ȱ the ȱ wizard ȱ screen ȱ and ȱ click ȱ
Next
.
The ȱ head Ȭ purge ȱ cycle ȱ begins. ȱ When ȱ this ȱ is ȱ complete, ȱ the ȱ final ȱ wizard ȱ
screen ȱ appears.
Figure 6-21: Head-cleaning wizard—final screen
14. Click ȱ
Done
ȱ to ȱ close ȱ the ȱ wizard.
Use this opportunity to clean the glass lens on the UV lamps.