Stratasys P750K, User Manual

Page: 188 / 196

Operating & Maintaining the Stratasys P750K 3D Printer
6–72
DOC08010 Rev. A (DRAFT 1)
Figure 6-112: Printer interface, showing waste weight (red background indicates
operator alert)
The ȱ waste ȱ container ȱ consists ȱ of ȱ a ȱ plastic ȱ container ȱ inside ȱ a ȱ cardboard ȱ box. ȱ
You ȱ typically ȱ dispose ȱ of ȱ the ȱ entire ȱ waste ȱ container—including ȱ the ȱ box. ȱ
Therefore, ȱ you ȱ must ȱ assemble ȱ a ȱ new ȱ box ȱ and ȱ insert ȱ a ȱ new ȱ plastic ȱ container ȱ
before ȱ you ȱ can ȱ install ȱ it ȱ in ȱ the ȱ printer.
To prepare a new waste container:
1. Assemble ȱ the ȱ cardboard ȱ box, ȱ making ȱ sure ȱ to ȱ punch ȱ out ȱ the ȱ perforated ȱ
sections.
2. Place ȱ a ȱ new ȱ plastic ȱ container ȱ into ȱ the ȱ box.
Note: Do not close the box until you connect the waste drain tube from the
printer.
Waste weight
Display
toggle button
Replacement boxes, plastic containers, and sealing caps are supplied in the
Stratasys printer start-up kit and in the preventive-maintenance kit.