Stratasys P750K, User Manual

Page: 47 / 196

DOC08010 Rev. A (DRAFT 1)
5–11
Stratasys P750K User Guide
Figure 5-10: Assembly c heck box selected— stl files are placed as an assembly
Figure 5-11: Assembly check box not selected— stl files are placed as parts
The ȱ Model ȱ Settings ȱ ribbon ȱ is ȱ displayed ȱ when ȱ objects ȱ are ȱ placed ȱ on ȱ the ȱ
build ȱ tray.
5. Select ȱ any ȱ of ȱ the ȱ following ȱ options, ȱ as ȱ required:
•
Units
—Millimeters ȱ or ȱ inches ȱ for ȱ the ȱ object’s ȱ units ȱ of ȱ measure.
The ȱ 3D ȱ file ȱ contains ȱ the ȱ object ȇ s ȱ proportions, ȱ but ȱ not ȱ its ȱ units ȱ of ȱ
measure. ȱ Therefore, ȱ make ȱ sure ȱ to ȱ correctly ȱ select ȱ either ȱ
millimeters
ȱ
or ȱ
inches
ȱ when ȱ inserting ȱ an ȱ object. ȱ Otherwise, ȱ the ȱ size ȱ of ȱ the ȱ object ȱ
on ȱ the ȱ build ȱ tray ȱ will ȱ be ȱ either ȱ much ȱ too ȱ large ȱ or ȱ much ȱ too ȱ small. ȱ To ȱ
change ȱ the ȱ measurement ȱ units ȱ of ȱ objects ȱ already ȱ placed ȱ on ȱ the ȱ tray, ȱ
see ȱ “Measurement ȱ Units” ȱ on ȱ page 31.
•
Number of copies
—How ȱ many ȱ copies ȱ of ȱ this ȱ object ȱ to ȱ place ȱ on ȱ the ȱ
build ȱ tray.
•
Orient Automatically
—Automatically ȱ orient ȱ objects ȱ on ȱ the ȱ build ȱ tray ȱ
for ȱ efficient ȱ model ȱ building.
•
Assembly
—Mark ȱ this ȱ check ȱ box ȱ if ȱ you ȱ selected ȱ multiple ȱ stl ȱ files ȱ that ȱ
are ȱ part ȱ of ȱ an ȱ assembly.