RA7000 and ESA10000 Storage Subsystems
2–8
EK–SMCPP–UG. A01
After using the international unpacking label information to unpack your
ESA10000, follow the de-skidding instructions on the international unpacking
label and the information on the international de-skidding label to push the
ESA10000 off the shipping pallet, keeping in mind the following warnings and
cautions.
WARNING
Serious personnel injury can result if correct
safety precautions are not taken during the
removal procedure.
We recommend that three people perform the task
of unloading the ESA10000 SW600 cabinet from
its shipping pallet. Failure to use sufficient
personnel can result in personnel injury and
equipment damage.
The following procedure, along with the international unpacking label and Figure
2-5, will help you to remove the ESA10000 from the shipping pallet:
1. Remove the cover, the fasteners, and the corrugated board from the pallet.
2. Remove the cartons containing the ramp set and skirt kit and set them aside.
3. Cut the shipping straps. Some cabinets are packaged in a plastic or barrier
bag. If the cabinet arrives in a plastic bag, leave the bag in place until the
cabinet has adjusted to the local temperature and humidity.
4. Once the cabinet is unpacked, examine the front and rear doors, right and
left side panels, top panel, and undercarriage for any apparent damage.
Report such problems immediately.
5. Retain the shipping container and all packing materials.
