Chapter 1. Product Description
EK–SMCPP–UG. A01
1–7
The subsystem enclosure supports single-ended, Ultra Wide storage devices. The
configuration rules for the SCSI buses are as follows:
•
All devices and ports in the same column are on the same SCSI bus or port
•
All devices in the same row (device shelf) have the same device address
•
You may only install controller-compatible Ultra Wide storage SBBs
•
Device addresses 4 and 5 are only used when the SBB has a device address
switch
•
Device addresses are determined by the backplane connector into which the
device is inserted unless the SBB has a device address switch
1.2.3 Single-Ended I/O Module (SE I/O)
Figure 1–7 Single-Ended I/O Module Location
