RA7000 and ESA10000 Storage Subsystems
2–2
EK–SMCPP–UG. A01
2.1.2 Unpacking the RA7000 Subsystem Enclosure
The storage cabinet is packed in a corrugated carton attached to a wooden
shipping pallet, as shown in Figure 2-2A. Unpack the cabinet as follows:
NOTE
Before unpacking the equipment, inspect the
shipping carton for signs of external damage.
Report any damage to the local carrier and to your
sales representative.
1. Remove the shipping straps (Figure 2-2A).
2. Remove the top cover (Figure 2-2B).
3. Remove the ramp from the top of the shipping carton (Figure 2-2B) and set
it aside for subsequent use in moving the cabinet off the pallet.
4. Remove the two foam cushions from the top of the cabinet container (Figure
2-2B).
5. Remove the cardboard carton surrounding the expansion cabinet
(Figure 2-2B).
6. Remove the plastic barrier bag (Figure 2-2C).
7. Once the cabinet is exposed (Figure 2-2D), examine the equipment for any
apparent damage. Report any problems immediately to your sales
representative.
