Snell Advanced Media MV-805, User Manual

Page: 77 / 139

MV-805 IP Multiviewer User Manual Getting Started 1 - Unit Settings (RollCall Template)
Issue1 Revision 1 Page 77 © 2018 SAM
7 Getting Started 1 - Unit Settings (RollCall Template)
This section describes part of getting the MV-805 IP Multiviewer going from out-of-the-box.
Section contents:
The section covers the configuring of initial unit settings via the unit’s RollCall templates.
Required items for this section:
• Computer running RollCall Control Panel.
• IP address/port/sub-net and gateway etc. information about other IP routing system
devices.
Sub-section Page
7.1 How to Connect RollCall Control Panel to the MV-805 unit 78
7.2 Initial MV-805 Unit Configuration with RollCall 81
7.2.1 Setting Up the Host Name 81
7.2.2 Setting Up the Control Network Interface(s) 82
7.2.3 Setting Up the Media IP Fabric Network Interface(s) 83
7.2.4 Setting Up the RollCall Settings 84
7.2.5 Assigning Network Interfaces as Fabric A or B 84
7.2.6 Getting the Multiviewer Input Signal Names 85
7.2.7 Adding some Information Text 86
7.2.8 Apply Initial Unit Settings (via a Service Reset) 86
7.3 Shutting Down the Unit 87
7.4 Connect up Network and Power onto the Unit 88
Configure Unit Settings
Configure IP Routing Settings
Design and Layout
Multiviewer Video Wall
This section .
(For RollCall template descriptions,
see Section 6 “RollCall Templates” on page 46.)
See Section 8 “Getting Started 2 - IP Routing (Orbit)”
on page 89.
See Section 9 “Getting Started 3 - Design/Layout of
Video Wall (Orbit)” on page 108.