MV-805 IP Multiviewer User Manual
Video Timing Reference
Product Overview 3.6
Issue1 Revision 1
Page 22
© 2018 SAM
3.6 Video Timing Reference
There is no dedicated video timing reference input. Instead, all incoming video IP streams are
synchronised to a PTP timestamp (as per SMPTE-2059).
3.7 Software Compatibility Matrix
Table 2 states the SAM Orbit versions and RollCall Control Panel software releases to use
with MV-805.
3.8 Configuration Overview
3.8.1 Unit Settings (RollCall Templates)
The MV-805 unit’s configuration settings are set up on the unit’s RollCall templates,
accessible via SAM’s RollCall Control Panel tool or SAM’s Orbit tool.
The SAM Orbit application can provide:
1.
Access to the RollCall templates.
2.
IP routing system configuration, via an Orbit IP Routing project.
3.
Multiviewer video wall layout design, via an Orbit Multiviewer project.
See Section 6 “RollCall Templates” on page 46.
See Section 7 “Getting Started 1 - Unit Settings (RollCall Template)” on page 77.
3.8.2
Unit
IP Routing Settings in the IP Routing System
The SAM Orbit software application and a SAM Orbit
IP routing
project is used to prepare an
IP routing system.
See Section 8 “Getting Started 2 - IP Routing (Orbit)” on page 89.
3.8.3 Design/Layout of Video Wall
The layout and style of the multiviewer video walls are designed with SAM Orbit software
application and a SAM Orbit
multiviewer
project.
Multiviewer wall designs are stored as individual projects which are pushed to an MV-805
device for use. Projects should be given unique project names.
Multiple wall layout designs may be generated and stored on a PC. Different wall designs can
then be pushed to the multiviewer for various different MV-805 multiviewer applications. Wall
layouts can be changed on the fly.
Software
Version
SAM Orbit software application
2.1 onwards
RollCall
Software release
4.17.1
Table 2
Software Compatibility Matrix
