MV-805 IP Multiviewer User Manual
Initial MV-805 Unit Configuration with RollCall
Getting Started 1 - Unit Settings (RollCall Template) 7.2
Issue1 Revision 1
Page 86
© 2018 SAM
7.2.7 Adding some Information Text
The items in the
Information
section of the System-Setup template (see Figure 61) are for
information only:
17. Enter a
Name
for the unit. This should be a ‘friendly’ name.
18. Enter a
Location
for the unit.
19. Enter any
Notes
for the unit.
(Remember to click the
S
button or press the
return
key to save the changed text locally.)
This has completed the initial MV-805 unit settings in the
System-Setup
template.
The following sub-section applies these setting changes to the unit.
7.2.8 Apply Initial Unit Settings (via a Service Reset)
When all configuration settings changes in the
System-Setup
template have been done:
20. Click on the
Service Reset
button at the top of the
System-Setup
screen
(see Section 6.2.2 "System Reset box" on page 51).
21. Then click
Confirm
to perform a service reset.
22. When the MV-805 unit has restarted, the new settings will be adopted.
The MV-805 system can then be shutdown and connected to your house media
networks.
Figure 61 Information Box
Important:
A
Service Reset
of the MV-805 system is required before saved settings changes in the
System-Setup
template take effect.
Such a reset will restart the IP multiviewer software on the MV-805 unit.
This will affect all MV-805 network connections, including the comms and multiviewer
output video IP streams.
