MV-805 IP Multiviewer User Manual
Unit Front Panel
Unit Hardware 4.3
Issue1 Revision 1
Page 28
© 2018 SAM
LED / Control
Indicator
Color
Description
UID and Information LED
“UID” LED
Red
On, illuminated: Overheat Condition.
Flashing
Flash 1 Hz: Fan Failure.
Slow Flash
Flash 0.25 Hz: Power Failure.
Blue
On, illuminated: Local unit identification (UID) is activated.
Enables user to locate the unit in a rack environment.
Quick Flash
Flashes 3 Hz: Remote UID activated.
Enables user to locate unit in a rack environment.
Chassis LAN 1 LED
Chassis ethernet LAN 1 interface. (Left-hand LED)
Network interface identifier: Control 2
“eno2”
Green
On: Network connection made.
Note:
LED is
on
if a network connection exists when unit is powered down.
Flashing
Green
Flashes on: Network activity.
Chassis LAN 2 LED
Chassis ethernet LAN 2 interface. (Right-hand LED)
Network interface identifier: Control
“eno1”
Green
On: Network connection made.
Note:
LED is
on
if a network connection exists when unit is powered down.
Flashing
Green
Flashes on: Network activity.
SSD Activity LED
Amber
On: Flashes for SSD access activity.
System Operating
LED
Green
On, illuminated: System is operating.
Off: System is powered down, but power may still be applied to rear of unit.
WARNING:
Power might still be connected to the unit when LED is off.
UID Push Button
-
Unit Identification (UID) push button:
•
Push to illuminate the unit’s front and rear blue UID LEDs.
•
Push again to extinguish UID LEDs.
Note:
UID LEDs and chassis locations:
•
At front of unit - the UID LED illuminates blue.
•
At rear of unit - there is a blue UID LED.
Table 3 MV-805 Front Panel LEDs and Controls
