MV-805 IP Multiviewer User Manual
System-Setup Template
RollCall Templates 6.2
Issue1 Revision 1
Page 62
© 2018 SAM
6.2.8 Service Reset to Effect Settings Changes in the System-Setup Template
After making settings changes in the
System-Setup
template, an MV-805
Service Reset
is
required and this is done from the template.
The template indicates if a
Service Reset
is required by showing a “Restart Required”
message in the
System Box
at the top of each template, see Figure 36.
To do a
Service Reset
from the
System-Setup
template:
1.
Click the
Service Reset
button.
2.
Click the
Confirm
button.
The unit takes 2-3 minutes to complete the reset.
See Section 6.2.2 “System Reset box” on page 51 for details about a Service Reset.
At the beginning of the
Service Reset
, the RollCall template indicates unit ‘Restarting’, see
After the unit has restarted, the RollCall template can be viewed by RollCall Control Panel.
While the RollCall template is being populated with information, it is all visible and the System
box on the template shows a “Starting” message. See Figure 38.
When the template is fully ready, the System Box shows “System: OK”, see Figure 39.
Figure 36 System Box “Restart Required” Template Message
Figure 37 System Reset Starting Shown in Template
Figure 38 System Box “Starting” Message
Figure 39 System Box “System: OK” - System is Ready
